Bradford White BJVS225 - Manual (Page 3)

Brute Mini JV Page 3
SECTION 1.
General Information
1A. Introduction
This manual provides information necessary for
the installation, operation, and maintenance of the
Bradford White Model JV low pressure, copper tube
hydronic boilers. These boilers are available in two
configurations; the JVH has a hot surface pilot ignition
system and the JVS has an electronic intermittent
ignition device (I.I.D.). Look for the model
designation on the rating plate, which can be found on
top of the boiler.
All application and installation procedures should
be reviewed completely before proceeding with the
installation. Consult the Bradford White factory, or
local factory representative, with any problems or
questions regarding this equipment. Experience has
shown that most operating problems are caused by
improper installation.
WARNING
This hydronic boiler must be installed in
accordance with the procedures detailed in this
manual, or the Bradford White warranty will be
voided. The installation must conform to the
requirements of the local jurisdiction having
authority, and, in the United States, to the latest
edition of the National Fuel Gas Code, ANSI
Z223.1. In Canada, the installation must conform
with the latest edition of CAN/CGA B149.1 OR .2
installation codes for gas burning appliances, and/
or local codes.
Any modifications to the boiler, its gas controls,
gas orifices, wiring or draft inducer assembly
may void the warranty. If field conditions require
modifications, consult the factory representative
before initiating such modifications.
ATTENTION
L' eau chaude chaudière doit être installé en
conformité avec les procédures détaillées dans
ce manuel, ou le Bradford White garantie sera
annulée. L'installation doit être conforme aux
exigences de la juridiction locale ayant l'autorité,
et, aux ÉTATS-UNIS , à la dernière édition du
National gaz carburant Code, ANSI Z223.1. Au
Canada, l'installation doit être conforme à la plus
récente édition de la norme CAN/CGA B149.1
ou .2 codes d'installation gaz pour appareils de
combustion et/ou codes locaux.
1B. Warranty
Bradford White appliances are covered by a
limited warranty.
All warranty claims must be made to an authorized
Bradford White wholesale rep / distributor. To find
information about the wholesalers in your area,
please go to www.bradfordwhite.com. and click on
'Wholesalers'.
Claims must include the serial number and model
(this information can be found on the rating plate),
installation date, and name of the installer. Shipping
costs are not included in the warranty coverage.
Some accessory items are shipped in separate
packages. Verify receipt of all packages listed on
the packing slip. Inspect everything for damage
immediately upon delivery, and advise the carrier of
any shortages or damage. Any such claims should be
filed with the carrier. The carrier, not the shipper, is
responsible for shortages and damage to the shipment
whether visible or concealed.
The warranty does not cover damage caused by
improper assembly installation, operation or field
modification.