Canon SCANFRONT 300P - Manual (Page 132)

7-3
Chapter 7 ScanFront Administration Tool
2.
Installing ScanFront Administration Tool
❏ System Requirements
Install ScanFront Administration Tool on a computer that
is connected to the same network as the ScanFront
scanners, and that meets the following requirements.
Operating System
● Windows XP (32 bit/64 bit)
● Windows Server 2003 (32 bit/64 bit)
● Windows Vista (32 bit/64 bit)
● Windows Server 2008 (32 bit/64 bit)
● Windows Server 2008 R2
● Windows 7 (32 bit/64 bit)
❏ Installation
1. Insert the INSTRUCTIONS AND UTILITIES
CD-ROM into the computer.
2. Start the ScanFront Administration Tool installer.
Use Windows Explorer, for example, to locate the installer
in the following folder on the CD-ROM, and double-click
the installer to start it.
For Windows 7, Windows Vista, or Windows Server
2008:
Q:\AdministrationTool\Vista and 2008Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
For Windows XP or Windows Server 2003:
Q: \AdministrationTool\XP and 2003Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
Hint
An installer for the Japanese version of ScanFront
Administration Tool is also stored on the INSTRUCTIONS AND
UTILITIES CD-ROM. If necessary, you can install the Japanese
version of ScanFront Administration Tool by replacing “English”
in the folders mentioned above with “Japanese”.
You can only install one version of the software. Do not install
both versions on the same computer.
3. Click [Next].