Canon SCANFRONT 300P - Manual (Page 46)

3-12
Chapter 3 ScanFront Setup
❏ Display Language Setting
You can select the language displayed on touch panel. If
you change this setting, restart the scanner.
Hint
The display language setting can also be configured in
[Language/Timezone] on the Web Menu (Administrator Mode)
(see p. 6-30) .
❏ Network Test
Confirm whether communication is enabled between the
ScanFront and other devices on the network. Enter the IP
address of a device and press the [Execute] button to ping
the specified IP address and confirm whether
communication with the device is enabled.