Canon SCANFRONT 300P - Manual (Page 84)

5-32
Chapter 5 Operating Procedures
❏ File Formats
You can select from the three available file formats TIFF,
JPEG, and PDF, and the modes available for scanning
vary, depending on the file format setting.
(See “Mode” on
p. 5-28.)
TIFF format
Select [Single page (Front/back separate file)] to save each
side of each page as a separate image file, [Single page
(Front/back same file)] to save each page as a separate
image file, or [Multi page] to save one image file
containing multiple pages when scanning multiple pages.
JPEG format
Select the compression rate for JPEG compression.
PDF format
Configure the following settings for saving in PDF format.
• Compression
Select the compression method.
• Quality
Adjust the quality for the specified compression method.
• Multi page settings
Select [Single page (Front/back separate file)] to save
each side of each page as a separate image file, [Single
page (Front/back same file)] to save each page as a
separate image file, or [Multi page] to save one image
file containing multiple pages when scanning multiple
pages.
• OCR (Character Recognition)
If OCR is set to On, character recognition is performed
for the text within the scanned document, and the text is
embedded in the PDF file as text information.
The [Language setting] button enables you to select the
language for character recognition.
• Encryption (Security)
If you set encryption to On and then press the [Security
settings] button, the Security settings screen appears, and
you can configure the security settings for the PDF file.
For details,
see “Security Settings for PDF Files” on
p. 5-33 .