M2TECH Young DSD - Manual (Page 27)

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014
Copyright © 2014, M2Tech Srl
27
M2Tech
www.m2tech.biz
single-ended). The first value is preferred when driving low-sensitivity power
amplifiers, while the second value is best suited to when using the YOUNG DSD as a
true source connecting it to a preamplifier or when a high sensitivity power amplifier
is to be driven.
This feature is displayed on the display as shown in Fig. 8.
OUTPUT VOLTAGE
5.0V
Figure 8
7.8. Setting the Display’s Backlight Intensity
The YOUNG DSD display’s backlight intensity can be set on four different levels. An
automatic mode is also available which keeps the display always off, except when a
command is executed. This feature is displayed as shown in Fig. 9.
BACKLIGHT
LEVEL: 0
Figure 9
As for balance, this feature is applied in real-time to give user the possibility to
immediately see the results. Automatic mode is indicated by the “AUTO” value.