M2TECH Young DSD - Manual (Page 30)

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014
Copyright © 2014, M2Tech Srl
30
M2Tech
www.m2tech.biz
7.11. Checking Firmware Revision
The YOUNG DSD is a complicated device in which different microcontrollers interact for
correct operation. It’s possible, whenever needed, to update all controllers firmware
by the USB port of the YOUNG DSD. Therefore it’s necessary to access to YOUNG DSD
current firmware release information to decide whether an update is required or not.
This can be accomplished by accessing the menu as one of the items is that related
to firmware revisions, as shown in Fig. 13.
FW REV FPGA: 1.0
USB:1.1 uC: 1.0
Figure 13
Of course, a user can’t change the displayed values by the front panel controls nor
the remote: they only change when a firmware update is performed as described in
chapter 10.
7.12. Power Off and Standby