M2TECH Young DSD - Manual (Page 31)

YOUNG DSD
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION 1.1 – march 2014
Copyright © 2014, M2Tech Srl
31
M2Tech
www.m2tech.biz
The YOUNG DSD can be powered off by a prolonged push on the front panel’s left
button (Fig. 1, 1). After a couple seconds the unit switches off, reducing its current
draw to zero.
It is also possible to put the YOUNG DSD in standby by the related key on the remote
control. In this case, the YOUNG DSD, while stopping operation as when it is switched
off by the front panel, will keep a minimum current consumption because the main
controller and the IR receiver will stay on, waiting for an activation command from the
remote control (another push on the standby key) or any action on one front panel
control.
Standby mode is indicated by a LED lit on the front panel (Fig. 1, 2).
NOTE: Even in the off condition, the YOUNG DSD
YOUNG DSD YOUNG DSD YOUNG DSD actually draws a very little
current which is virtually negligible.