Magnum Dynalab MD-806T - Manual (Page 19)

- 19 -
Now playing information
While the stream is playing, the screen shows its frequency, or if RDS information is
available, station name and any further RDS information such as programme name,
track title and contact details. If no information is available, just the frequency is
shown. Stereo broadcasts are indicated with an icon at the top of the screen.
Settings
Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-
to-noise ratio (hiss) from weak stations. To change the scan settings to stop only at
stations with good signal strength, change the Stop on stations value from All to
Strong via the FM menu.
Audio settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may
result in a poor signal-to-noise ratio (hiss). To play weak stations in mono, touch the
FM menu bar > Force mono > Yes.