Magnum Dynalab MD-806T - Manual (Page 2)

- 2 -
BEFORE DOING THIS PLEASE START
READING AT PAGE 4 FOR SETUP OF
UNIT
QUICKSTART:
TURN ON UNIT WITH MAIN POWER
SWITCH ON FRONT OF UNIT
Hooking up to the WIRELESS Internet
service
1. Tap the Settings Menu
2. go to Network Settings
3. go to network wizard, go to wireless
, a list of routers will be shown
4 go to the name of your service
provider or name of the router
5 it will ask for your password or
security code which if you have not
set one up it will be the key number
or the number by the wireless
symbol on your router. You must
use your password if you have set
one up, if you can not find it , call
your service provider.
6 the screen will then say connected
7 go back to the main screen ( push
the X on the main screen) and
choose what menu you want to work
with ie: internet radio, FM
Trouble Shooting:
1. If the wizard does not give you a list of
routers go back to the Network
2. Settings and tap on the manual menu
then tap on add wireless network , it
will show DHCP yes and no , tap on yes,
enter the password for your router or
the security code
See step 5 above, the screen will
show connected
3. go back to the main screen (push the X
on the main screen ) and choose the
menu you want to work with, ie:
internet radio, Fm
LAN HOOKUP ( hard wire hookup )
1. Run a cable form the router to the
back of the unit and under settings go to
Network Wizzard ,go to wired network, go
to step 5 above