Magnum Dynalab MD-209 - Manual (Page 17)

- 17 -
SPECIFICATIONS
Power
Audio Frequency Response (+/-
0.1dB)
Class of Operation
Harmonic Distortion
Gain Control
Signal to Noise Ratio
Total Harmonic Distortion
Gain
Output Devices
Input Sensitivity
Input Impedance
Output Impedance
Inputs
Outputs
Dimensions (W.D.H.)
Weight
Fuse Replacement
Tube Specifications
Warranty
RF Specifications
Usable Sensitivity
50 dB Quieting (mono)
50 dB Quieting (stereo)
Capture Ratio
Image Rejection
Alternate Channel (wide)
Alternate Channel (narrow)
Adjacent Channel (wide)
Adjacent Channel (narrow)
THD (mono)
THD (stereo)
Stereo Separation
AM Suppression
SCA Rejection
IF Rejection
19 KHz & 38 KHz Component
Rejection
125 watts in 8 ohms, 250 watts into 4
ohms
2Hz - 100KHz
50 % of gain class A, 50 % of gain class
AB
< 0.05 % (2hz-100KHz)
Burr Brown
> -115dB
<0.1
28 dB
Sanken (bi-polar)
1.2 Volts at full power
10k
2k
5 Analog (2 balanced XLR, 3 single ended
including Surround Sound Processor
input)
1 line level pre-out, 3 digital (2 Coaxial, 1
USB)
19" x 19.5" X 6.5"
51 lbs
120V, 6.3amp slow blow OR 240V, 4
amp slow blow
2 x 6922
2 years
(mono) 0.7 u V 9.0 dBf
2.0 u V 9.9 dBf
2.3 u V 20.0 dBf
1.5 dB
125.0 dB
>46.0 dB
>80.0 dB
3.0 dB
30.0 dB
0.10%
0.10%
50.0 dB
70.0 dB
80.0 dB
80.0 dB
75.0 dB