Chapter 2 hardware installation – Cyclades PC400 User Manual
Page 6
Advertising
6
Chapter 2 Hardware Installation
CHAPTER 2 HARDWARE INSTALLATION
The body carries static electricity and if the person installing the PC400 is not correctly grounded, the board
could suffer irreversible damage. Please follow the instructions outlined below carefully to avoid harming the
board.
Step One:
Unplug the computer and remove all cables connecting the computer to other devices.
Step Two:
Carry the computer to a workbench or table where an anti-static wrist-strap is available. It is highly
recommended that a wrist-strap be used. Remove the computer cover, exposing the boards inside. Attach the
wrist-strap to your wrist.
.
Advertising