NextoDI ND2725 - Manual (Page 4)

① "BAT" connection for external rechargeable battery pack.
② "USB OTG” port for USB2.0 device connection to a computer or for USB2.0 host
connection to USB devices such as a card reader or camcorder.
③ "eSATA" port to connect to a computer. "eSATA" devices do not provide power, so use
the AC power adapter or a USB power connection when using eSATA.
④ Recessed Reset key, to be pressed with a tooth pick, or similar tool; switches off the
Nexto Video Storage device in the event of a hardware or software malfunction.
⑤ "DC IN" connection for AC power adapter unit (wall plug).
⑥ 4in1 slot to download data from SD/SDHC/MMC/MS/xD devices.
⑦ LCD Display.
⑧ Control (Copy) key. Controls power on/off and most other commands.
⑨ LED.
• Green indicates “power on.”
• Red indicates battery is charging.
• Blinking red indicates that a data transfer is occurring.
⑩ CompactFlash slot .
4. Safety Instructions
3
Device Diagram Safety Instructions
4
3. Device Diagram
Video Storage
The flash icon in a triangle is used to alert you to potential
personal injury hazards such as electric shock.
An exclamation mark in a triangle indicates important instructions
in this operating manual which absolutely have to be observed.
The "hand" icon gives you special tips and notes on the operation.
Symbol Explanation
In case of any damage due to failure to observe these
operating instructions, the warranty is void.
NextoDI does not assume liability for consequential damages.
Nor do we assume liability for damage to property or personal
injury, caused by improper use or the failure to observe the
safety instructions. The warranty is void in any such case.
These safety instructions and warnings are essential to protect your personal
safety, and to protect the device. Please read the following section carefully.