Outdoor Great Room Gas Grill LG36i - Manual (Page 10)

The Outdoor Greatroom Company • Legacy Gas Grill • Rev. E
10
Assembly Instructions
Carton A
2 - Front Swivel Caster with Brakes
2 - Rear Swivel Casters
1 - 3/4 inch Open-end Wrench Before beginning to assemble the grill, remove all parts
cartons from inside the lower cart cabinet, and the vapor-
izer plate and the searing deck inside the grill hood. (See
Figure 1).
Tools Needed
9/16 inch Open-end Wrench •
3/4 inch Open-end Wrench (included with grill) •
Philips Screwdriver •
Box Cutter or small sharp knife •
Supplies Needed (not included with grill)
20 lb. LPG Cylinder (approximately 12 inch diameter by •
18 1/2 inch maximum height)
Two “D” size Batteries •
Non-corrosive Commercial Leak Check Solution •
Figure 2
Figure 1
Front Swivel
Caster w/Brakes
Carton B
3 - Cooking Grids
Figure 3
Carton C
1 - Grease Drawer
Figure 4
Step 1. Check Carton Contents
Carefully open the parts cartons marked A through E and
compare contents with the following Figures 2 through 6.
Contact your dealer if any parts are missing or damaged.
Vaporizer Plate
Searing Deck
Rear Swivel
Caster
Wrench