Cisco UNIFIED OPERATIONS MANAGER OL-19470-01 - Manual (Page 15)

13-15
User Guide for Cisco Unified Operations Manager
OL-19470-01
Chapter 13 Generating Audio Phone and Video Phone Reports
Using Audio Phones and Applications Reports
GUI Element Description/Action
Find IP Phones
where list boxes and
field From left to right:
• Select one of the following:
– Extension number
– IP Address
– MAC Address
• Select one of the following:
– is exactly
– begins with
– contains
– ends with
• Enter a value.
VLAN Name field Enter the name of the VLAN.
VLAN ID field Enter the VLAN ID.
IP Phone Outage
Status radio buttons Select one:
• Registered
• Unregistered
• All—Registered and unregistered phones.
SRST radio buttons Select one:
• SRST—Configured to fail over to an SRST router in case of a WAN link
failure.
• Non-SRST—Not configured for SRST.
• All—SRST and non-SRST.
IP Phone Type field Enter a comma-separated list of phone models. By default, all supported phone
models are included in this field, including IP Communicator. Edit the entries
in the field directly or select from a list of phone models, as follows:
1. Click . The Select IP Phone Types list appears.
2. Select the desired IP phone types from the list. (Use the Control key or the
Shift key to select more than one IP phone type from the list.)
3. Click OK.