Cisco UNIFIED OPERATIONS MANAGER OL-19470-01 - Manual (Page 2)

13-2
User Guide for Cisco Unified Operations Manager
OL-19470-01
Chapter 13 Generating Audio Phone and Video Phone Reports
Using Audio Phones and Applications Reports
– Inventory Analysis—Use the Inventory Analysis report to display IP phones that meet criteria
that you specify; for example, IP phones that are registered to a particular Cisco Unified
Communications Manager or IP phones that are not connected to particular switches. See
Generating the Inventory Analysis Report, page 13-5 and Understanding IP Phone Inventory
Reports, page 13-11 .
– All IP Phones/Lines—Use the All IP Phones/Lines report to view data for all IP phones that
Operations Manager is monitoring. See
Generating the All IP Phones/Lines Report, page 13-8
and Understanding IP Phone Inventory Reports, page 13-11 .
– SRST IP Phones—Use the SRST IP phones report to view data for IP phones that are
configured for Survivable Remote Site Telephony (SRST) only. See
Generating the SRST IP
Phones Report, page 13-8 and Understanding IP Phone Inventory Reports, page 13-11 .
Note IP phones that are configured for SRST are also included in the All IP Phones/Lines
report and can be included in the Inventory Analysis report.
– SIP Phones—Use the SIP Phones report to view data for all SIP phones that Operations
Manager is monitoring. See
Generating the SIP Phones Report, page 13-9 and Understanding
IP Phone Inventory Reports, page 13-11 .
– IP Communicators—Use the IP Communicators report to view data for IP Communicators.
See
Generating the IP Communicators Report, page 13-9 and Understanding IP Phone
Inventory Reports, page 13-11 .
Note IP Communicators are also included in the All IP Phones/Lines and All CTI
Applications reports, and can be included in the Inventory Analysis report.
– All CTI Applications—Use the All CTI Applications report to view data for CTI applications.
See
Generating the All CTI Applications Report, page 13-9 .
When a web interface is accessible for an IP phone, you can open it from most IP phone reports by
clicking the hyperlink for one of the following:
– Extension number
– MAC address
– IP address
For more information, see Opening an IP Phone Web Interface, page 13-18 .
• IP Phone Outage Status reports—Provide data for IP phones that have undergone a status change
during the previous 1 to 30 days:
– IP Phone Move—Use the IP Phone Move report to view data for phones that have been
connected to a different switch or switch port or that have registered to a different Cisco Unified
Communications Manager. See
Using the IP Phone Move Report, page 13-21 .
– Duplicate MAC/IP Address—See Using the Duplicate MAC/IP Address Report, page 13-26 .
– Extension Number Change—See Using the Extension Number Changes Report, page 13-24 .
– Suspect Phone—Use the Suspect Phone report to view data for phones that are not registered
to a Cisco Unified Communications Manager or that have attempted to register and failed. See
Using the Suspect Phone Report, page 13-25 .
– Removed—See Using the Removed IP Phones Report, page 13-23 .