Cisco UNIFIED OPERATIONS MANAGER OL-19470-01 - Manual (Page 31)

13-31
User Guide for Cisco Unified Operations Manager
OL-19470-01
Chapter 13 Generating Audio Phone and Video Phone Reports
Using Video Phones Reports
Step 3 Click View. The Video Phone Details dialog box appears, displaying the information described in the
following table.
a. To display the information in print-friendly format in a new browser window, click Print; print the
information, using the browser print function.
b. If search results include more than one phone, view them by clicking Next or Prev.
Table 13-7 Video Phone Details
Row Description
Extension Extension number of the video phone; for example, 4000. Click the hyperlink to open the web interface
on the video phone (see
Opening an IP Phone Web Interface, page 13-18 ).
IP Address IP address of the video phone; for example, 10.76.38.65. Click the hyperlink to see more details of the
video phone (see
Opening an IP Phone Web Interface, page 13-18 ).
MAC Address MAC address of the video phone; for example, 003094c40454, or 00-30-94-c4-04-54. Click the
hyperlink to open the web interface on the video phone (see
Opening an IP Phone Web Interface,
page 13-18 ).
CCM Address Address of the Cisco Unified Communications Manager (CCM) with which the video phone is
registered; for example, 10.76.38.70.
Switch Address IP address of the switch to which the video phone is connected; for example, 10.76.29.162.
Switch Name Switch to which the video phone is connected.
Switch Port Switch port to which the video phone is connected; for example, Fa0/12.
Port Status Status of the switch port to which the video phone is connected: up or down.
Video Phone Status Cisco Unified Communications Manager registration status of the video phone:
• yes—The video phone is registered with a Cisco Unified Communications Manager.
• no—The video phone is not registered with a Cisco Unified Communications Manager.
Video Phone Model Cisco video phone model number.
Protocol Protocol the phone is using to communicate with Cisco Unified Communications Manager.
Note Only SCCP and SIP phones will be discovered. H.323 and MGCP protocols are not currently
supported.
VLAN Name Name of the VLAN in the switch (a user-defined name); for example, voice.
VLAN ID ID of the VLAN in the switch to which the video phone is connected; for example, 100.
SRST Router IP address of the router that the phone is using for SRST.
SRST Mode Can be one of the following:
• yes—The phone is in SRST mode
• no—The phone is not in SRST mode
• ?—The phone is suspected to be in SRST mode
• –(dash)—The phone is not an SRST phone