CREATIVE PC-DVD 5x Drive Dxr2 - Manual (Page 15)

Getting Acquainted with PC-DVD Encore 3
English
Dxr2 Decoder
Card The DynamicXtended Resolution, or Dxr2, decoder card allows you to playback MPEG-1, MPEG-2, and
digital video discs (DVDs) on your monitor at resolutions up to 1280x1024 pixels and a rate of 30 frames
per second.
Your Dxr2 decoder card has the jacks and connectors shown below.
DIGITAL_OUT
VGA In connector
connects to the VGA card in your computer
using the VGA loopback cable. The
loopback cable sends video signals from
the VGA card to the Dxr2 decoder card.
Audio Out connector
connects to the CD
audio connector of your
audio card. Dolby Digital (AC-3) S/PDIF jack
connects an external Dolby Digital device that
supports AC-3 specifications.
TV Out jack
connects to your television monitor
using the TV Out cable provided.
Monitor Out connector
connects to the VGA monitor using the VGA
monitor cable, allowing you to send video signals
from the Dxr2 decoder card to the VGA monitor.
Audio In connectors
connects to your PC-DVD
drive and/or CD-ROM drive.
Digital Out connector
connects to the I
2 S connector on your audio card. NOTE:
Your Dxr2 decoder card may not have this connector.
Your audio card may not have this connector. Refer to
your audio card manual for more information.
Dvd-fm.book Page 3 Thursday, December 17, 1998 9:44 AM