Y-cam Classic Range - Manual (Page 11)

Page 11
4.0 Y‐CAM SOFTWARE INSTALLATION
The Y‐cam Setup utility can easily and quickly detect cameras connected to your local network and list them on the
Camera Setup window; also you can use the Y‐cam Setup utility to assign an IP address to each camera.
4.1 Y‐cam Software Installation for PC
1. Insert the Installation CD into your CD‐ROM drive and the installation screen should appear automatically
(See image below). If it does not, click “Start” then “Run”. In the text field enter “D:\autorun.exe” (if “D:” is
the letter of your CD‐ROM Drive)
2. Click on “install software” and the following screen will be displayed. Click “Next”.