Y-cam Classic Range - Manual (Page 51)

Page 51
6.54 Backup and Reset
Allows you to reset the camera to factory defaults, allows you to backup the configuration incase of accidental reset and
allows you to restore settings from a backup.
[Reset] Click Reset to initialize the Y‐cam to default factory settings. All users and settings will be lost, requiring you to
reconfigure the camera.
[Backup] Click Backup to backup the current configuration of the Y‐cam for future reference. Once you have your
camera setup as you require, this is recommended.
[Browse...] Click Browse... to search for a backup configuration you wish to upload to the camera, then click Restore.
Note: Do not turn off the power during the Reset, Backup or Restore functions since this might corrupt the camera’s
firmware
Tip: The camera can also be reset to the default settings by pressing the reset switch on the side of the camera.