Y-cam Classic Range - Manual (Page 62)

Page 62
7.5 Resetting the Y‐cam to Factory Defaults
There are two ways to reset the Y‐cam back to its factory defaults:
1. Press the Reset button on the side of the camera through the pin hole.
2. Through the Camera Settings / Tools Menu under the heading “Backup or Reset”
7.6 Third Party Software
Y‐cam is supported by number of security software. Some of them are listed below. However you are advised to visit
http://www.y‐cam.com periodically for the updated list.
Icatcher http://www.icode.co.uk
Luxriot http://www.luxriot.com/
Verified Alarm http://www.initsys.co.uk
BlueIris http://www.blueirissoftware.com
Security Spy http://www.securityspy.com
Camvista http://www.camvista.co.uk
Nuuo NVR IP+ http://www.nuuo.com
Eyesoft http://www.bikal.co.uk
NetcamWatcher http://www.netcam‐watcher.com
Nuuo NVR (IP+) http://www.nuuo.com/product.php?id=12
Any software that supports generic MJPEG cameras should work with Y‐cam IP cameras.
In order to use the Y‐cams with software that supports adding a generic MJPEG camera, please use the path of your
camera with “/stream.jpg” on the end of it. This will instruct the software to extract the Motion JPEG video stream from
the specified path in the Y‐cam. All current Y‐cam models support this method.
7.7 Alternative methods of accessing the video stream
You can also access video/images from the network camera in the following ways:
• Motion JPEG server push (if supported by the client, Firefox, for example). This option maintains an open HTTP
connection to the browser and sends data as and when required, for as long as required. Enter the path ‐
http://<ip>/stream.jpg
• Still JPEG images in a browser. Enter the path ‐ http://<ip>/snapshot.jpg
• MJPEG via RTSP: rtsp://<ip>/live_mjpeg.sdp
• MPEG4 via RTSP: rtsp://<ip>/live_mpeg4.sdp
RTSP MPEG4 stream: rtsp://10.10.10.133/live_mpeg4.sdp
RTSP MJPEG stream: rtsp://10.10.10.133/live_mjpeg.sdp
HTTP MPEG4 stream: http://10.10.10.133:8009/stream.av
HTTP MJPEG stream: http://10.10.10.133:8009/stream.jpg
HTTP snapshot image: http://10.10.10.133:8009/snapshot.jpg
For further details please click on the links in the “Stream Setup” page of the camera settings by the name of “Primary
Stream”, “Secondary Stream” and “Mobile Stream”.