Classe Audio CDP-502 - Manual (Page 46)

46
Specifications
All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
Frequency response
(balanced and single-ended) 8 Hz – 20 kHz +0/-0.4dB
Distortion (THD+noise) 0.001%
Output voltage (single-ended) 2Vrms
Output voltage (balanced) 4Vrms
Signal-to-noise ratio
>110dBfs 22Hz - 22kHz A Weighted
Channel separation better than 115dB
D/A Converter 3x Burr Brown PCM 1792
Audio sample rate 192kHz
Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video,
VCD, SVCD, MP3, WMA, DVD-R, DVD+R,
DVD-RW, DVD+RW
Audio outputs 2 x RCA, 2 x XLR, Coax S/PDIF 1 x RCA,
AES/EBU 1 x XLR, Optical 1 x Toslink
Video outputs HDMI, Component (progressive scan),
S-Video, Composite
Internal Scaling
480i (via all video outputs),
480p (via component and HDMI)
720p/1080i/1080p (via HDMI)
Power consumption 72W
Mains voltage determined by the needs of country for which the unit
was manufactured; cannot be reset by dealer or user
Overall dimensions Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
Net weight 27 lb (12.3 kg)
Shipping weight 35 lb (15.9 kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet: http://www.classeaudio.com
email: [email protected]
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX ® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.