Curtis TC924 - Manual (Page 22)

Function Settings
You can change the setting on the HANDSET in the functions menu. Access the functions
menu by pressing and holding the Voice Mail/Func button.
There are 11 settings in the functions menu which can be changed. You can scroll through
the function menu in the listed order by pressing the SCROLL DOWN
button.
Settings can be accessed by pressing the corresponding TELEPHONE KEYPAD button. To edit
a setting, press the Flash/Edit button, use the SCROLL UP
or DOWN button to toggle
between the setting options, and then press and hold the Re/Pa/Save button to save the
changes. Press the Voice Mail/Func button to exit the functions menu.
TELEPHONE Function
KEYPAD
Ring Hi/Low/Off: Changes the volume of the ringer on the HANDSET
or turn the ringer OFF.
Language: Changes the language that appears on the LCD Screen.
Choose between English, French, or Spanish.
First Ring On/Off: Turns the first ring of the phone OFF so that it does
not ring until Caller ID information has been displayed. Particularly useful
when using the PREFERRED and BLOCKED CALL features or the
PRIVATE and UNAVAILABLE ring settings.
Time Set: Changes the time and date.
Contrast: Adjusts the brightness of the LCD Screen for optimum
viewing.
PBX Number: Inserts if a “PBX Number” before an outgoing number is
dialed. Select the number (0-9) which is required to access an outside
line when using a switchboard system, and the phone will auto-
matically dial the PBX number and a pause before any speed dial or
Caller ID callback number. Factory setting is “OFF.”
Flash Time: Changes the flash time to accommodate the phone
service in your area.
Pause Time: Changes the number of seconds that a pause lasts
when using programmed pauses in your speed dial numbers or
after your PBX number.
1
2
3
4
5
6
7
8
Caller ID System Operation
21