Curtis TC924 - Manual (Page 27)

J. Deleting Message Waiting Indication
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the 0 button to go to the MESSAGE WAITING programming option.
3. Press the Flash/Edit button to reset the Message Waiting Indication.
“DEL” will begin flashing.
4. Press and hold the Re/Pa/Save button to delete the indication. A long
“beep” will sound to confirm the setting has been saved.
5. Continue with programming or press the Voice Mail/Func button to return
to STANDBY mode.
K. Setting the Area Code
1. Press and hold the Voice Mail/Func button to enter the menu.
2. Press the * button to go to the AREA CODE programming option.
3. Press the Flash/Edit button to change the setting. “000” will begin
flashing.
4. Press the TELEPHONE KEYPAD 1 to 0 buttons to enter the three digit area
code for your phone number.
5. When the desired setting is displayed, press and hold the Re/Pa/Save
button to save the setting. A long “beep” will sound to confirm the setting has
been saved.
6. Press the Voice Mail/Func button to return to STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
(XXX-XXX-XXXX) to dial a local number.
Caller ID System Operation
26