Vernier EasyData Guidebook - Manual (Page 53)

52 EasyData Guidebook
8. From the Conversion Equation screen, choose the type
of calibration equation to be used and then select
. Note: most sensors use a linear calibration
equation.
9. The Sensor Setup screen is displayed with updated
information pertaining to the custom sensor. Select
to return to the main screen.
Digital Sensors
1. From the EasyData main screen, select , and
then select Other Sensors....
2. The Select Channel screen is displayed. Choose
DIG/SONIC, and then select
.
3. The Select Sensor screen is displayed. Choose either
Photogate or Drop Counter, and then select
.
The main screen is displayed with updated information
pertaining to the custom sensor.