Vernier EasyData Guidebook - Manual (Page 65)

64 EasyData Guidebook
Appendix C: Warning Messages
The table below explains the purpose and meaning of messages that may
be encountered while using EasyData.
Message Description
A new Auto-ID sensor has been detected.
Select to delete all setup information, data, and
scan for new sensors.
Select to add the detected sensor while
preserving all existing data and setup information.
The application has stored all collected data in the
calculator lists shown.
Select to exit EasyData.
Selecting to return to the EasyData main
screen.
The Select Region function deletes all data outside of
the area selected. All data lists will be affected.
Select to abort this function and preserve data.
Select to perform the Select Region function and
delete all data outside the selection.
EasyData has detected existing data which will be
overwritten by the requested data collection.
Select to return to the main screen and
preserve the data.
Select to continue and overwrite existing data.
Existing data has been detected and will be
overwritten by the requested data collection. Stored
data runs will be preserved.
Select to return to the main screen and
preserve the data.
Select to begin and overwrite data not stored.