Vernier EasyData Guidebook - Manual (Page 62)

EasyData Guidebook 61
Message Description
EasyData cannot perform the selected operation
unless a sensor is set up.
Select and either connect an Auto-ID sensor or
select and choose Other Sensors to set up a
sensor manually.
EasyData cannot perform the selected operation
unless a data-collection device is connected.
Select and perform one of the following:
Connect a data-collection device. Select and
choose New.
Select to exit EasyData. Connect a data-
collection device and then restart EasyData.
There is insufficient calculator memory available to
complete the requested operation. Managing
experiment files uses free archive memory and/or
RAM.
Select to exit EasyData. Free up RAM by
deleting lists, matrices, and other calculator variables.
Free up Archive by deleting other applications. Restart
EasyData when memory has been freed up.
The number entered is invalid.
Select and enter a valid number.
Experiment names must start with a letter and cannot
share a name with an existing file (appVar) that was
created by another application.
Select and enter a different, valid experiment
name.