Sangean DPR-65 Basic Black (V1) - Manual (Page 10)

9
Using USB cable to charge
USB Cable Use this cable to connect your radio to any power source
with a USB port (e.g.PC) to charge.
. Connect 3.8 mm plug to the DC jack.
. Connect USB to any power source with USB port (e.g.PC).
Important:
The radio battery may drain instead of charge if radio is connected
to a PC that’s turned off or is in sleep or standby mode, or to a USB
hub, or to a USB port on a keyboard.
Other way to provide power to your radio
USB power adapter (not included) Use the USB power adapter to
provide power to your radio and charge the battery.
. Buy a USB power adapter and connect the USB plug to the USB
port on the power adapter.
. Connect 3.8 mm plug to the DC jack.
3. Plug the power adapter into a wall socket. Your radio will begin
charging.