Sangean DPR-65 Basic Black (V1) User Manual

Page 21

Advertising
background image

0

GB

Manual tuning – FM

. Press the Power On/Off button to switch on your radio.

. Press the Band button to select the FM band. Fully extend the
Telescopic aerial.

3. Press and release the Select button until the display shows “Manual
tune < >”.

4. Press either Tuning Up or Down button to tune to a station. The
frequency will change steps of 50kHz. Pressing and holding one of
the buttons will advance the frequency selection several times each
second.

5. When the end of the waveband is reached the radio will recommence
tuning from the opposite end of the waveband.

6. Adjust the Volume control to the required setting.

7. To cancel the Manual Tune option, press and release the Select
button again sot that the display shows “Auto tune <>”.

6

3

Advertising