Sangean DPR-65 Basic Black (V1) - Manual (Page 12)


Operating your radio – DAB
. Carefully extend the telescopic aerial.
. Press the Power On/Off button to switch on your radio. The display
will show “Welcome to Digital Radio” briefly.
3. If this is the first time the radio is used a quick scan of the Band III
DAB channels will be carried out. The display will show “Welcome
to DAB”. If the radio has been used before the last used station will
be selected.
4. During the scanning process, as new stations are detected the
station counter on the right hand side of the display will increase and
stations will be added to the list. The lower line of the display shows
a bar-graph indicating progress of autotune.
5. When the scanning is complete the first station (in numeric-alpha
order 0…9…A….Z) will be selected.
6. If the station list is still empty after the scan your radio will display
“No DAB station”.
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
2