Sangean DPR-65 Basic Black (V1) - Manual (Page 30)

9
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
. Press and hold the Info button for  seconds to enter the menu.
. Repeatedly press the Tuning Up/Down button until the display shows
“Factory Reset”, the press the Select button.
3. If you wish to perform the reset operation, press the Select button one
more time. A full reset of your radio will be performed. All presets
and station lists will be erased.
4. After a system reset a scan of the DAB band will be performed. In
case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
1
2
2,3