Solar kit installation instructions – Talkaphone ETP-MTE-WP Wireless ECO TOWER with Pole User Manual

Page 18

Advertising
background image

Solar Kit Installation Instructions

Copyright 2013 Talk-A-Phone Co.

• 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com.

Page 18 of 25

All specifications are subject to change without notice. Talk-A-Phone is a registered trademark of Talk-A-Phone Co. All rights reserved.





Figure 27.

Connecting the power cable to the solar panel junction box


2. Connect the power cable from the solar panel to

the “SOLAR” terminals on the solar controller. Do not

discard excess wire. Refer to the wiring diagram as shown in Figure 28.

3. Connect the batteries in parallel to the

“BATTERY” terminals on the solar controller using the excess

power cable. Crimp-on connectors are included for the batteries. Ensure that the shunt on the solar
controller is installed correctly for the battery type. Refer to the wiring diagram as shown in Figure 28.



Advertising
This manual is related to the following products: