Talkaphone ETP-MTE-WP Wireless ECO TOWER with Pole - Manual (Page 7)

Solar Kit Installation Instructions
Copyright 2013 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone 773.539.1100 • [email protected] • www.talkaphone.com. Page 7 of 25
All specifications are subject to change without notice. Talk-A-Phone is a registered trademark of Talk-A-Phone Co. All rights reserved.
8. Refer to Appendix A for correct tilt angle according to geographic location. To adjust the tilt angle
loosen the bolts holding the mounting rails to the clips and adjust the tilt of the panel as shown in Figure
9. Retighten the bolts to 12 ft-lbs.
Figure 9. Panel tilt angle reference
Steps 9 – 12 are for solar kit SLR-80-84 only. For solar kit SLR-120-84, skip to step 13.
9. Attach the C-brackets to the inside face of the mounting rails using a 1/4- 20 x 3/4” hex bolt and washer
through one of the center holes as shown in Figure 10. Tighten the bolt securely so that the C-bracket
flanges are level and with the flanges of the lower bucket bracket.
Figure 10. Exploded view of C-bracket installation inside of mounting rail