Warpia SWP120A Rev B Installation Manual & Troubleshooting Guide - Manual (Page 22)

22
y Make sure that the external monitor’s power switch is on.
y Confirm that the external monitor’s power cable is plugged into a live
electrical outlet.
y Make sure that the external monitor is securely connected to the
StreamHD™.
y Check the external monitor settings.
y Refer also to the computer user’s manual and to the external monitor’s
documentation.
„ No image displays on the external monitor connected to the StreamHD™.
y If you connect through an HDMI or VGA Cable, check to ensure your cable
is connected properly on both sides.
y Make sure you have the correct video input selected on the TV or Projector
y Try adjusting the resolution, contrast and or brightness controls on the
external monitor.
y Check to make sure that the wireless connection is established between
the PC and the StreamHD (the StreamHD™ icon in the System Tray is
green, and when you double click on it, your TV or Monitor shows
connected).
y Make sure your Windows® operating system is updated with the latest
available Service Pack from Microsoft®.
y Your computer BIOS (Basic Input/Output System) may also need to be
updated. Refer to the your computer manufacturer's Web site for more
information.
y
Restart your computer after updating the operating system and/or the BIOS,
and try using the StreamHD™ again.
„
Display error.
y
Check that the cable connecting the external monitor to the StreamHD™ is
firmly attached to both the Receiver Base and the TV/Monitor.
„ The external monitor connected to the StreamHD™ shows only the wallpaper
background of my Windows® desktop.
.
y The default configuration for the external monitor connected to the
StreamHD™ is Extend mode (an extension of the image on the computer to
a second screen).
y This mode allows you to display different information on each monitor
connected to your computer. Drag a window off of the right side of your
primary display to have it appear on the external monitor.