Warpia SWP120A Installation Manual & Troubleshooting Guide - Manual (Page 34)

StreamHD Installation Guide
34
S electing the C orrect Dis play Monitor
In the monitor drop down box, find the entry for the Base Adapter display monitor
"...on DisplayLink Graphics". You can arrange this display's position with respect
to the other monitors on the extended desktop by using the drag area at the top
of the Windows Display Settings dialog. If you are not sure which number
represents which display, click Identify Monitors and a large identifying number
will appear on each display.
S etting the Dis play to E xtend or Mirror Mode
To set the display in Extend mode, check the option Extend the desktop onto
this monitor.
To set the display into Mirror mode, uncheck the box marked Extend the
desktop onto this monitor (see circle #1 in Figure above).
Adjus ting S creen R es olution
Use the Resolution slider to adjust the desired resolution of the display (see
circle #2 in above Figure).
Adjus ting C olor L evel
Use the Colors drop-down box to select a color complexity level (see circle #3 in
above Figure).
S etting the S treamHD adapter as the P rimary Dis play
To make the StreamHD adapter the primary display:
1. Select the screen that is connected to the Base Adapter - for example
"Default Monitor on DisplayLink Graphics Adapter" as shown in the
screen above.
2. Check the option Extend the desktop onto this monitor.
(In Windows XP - Extend my Windows desktop onto this monitor).