Audio, No audio in hdmi connection, Audio disappears after link disconnection – Warpia SWP120A Installation Manual & Troubleshooting Guide User Manual
Page 73
StreamHD Installation Guide
73
Audio
No Audio in HDMI connection
Problem/Question:
No audio on the remote TV.
Symptom:
The system is connected and movie is playing but no audio coming out of the TV
speakers.
Solution:
1. Install the
Recommended Media Player Applications
2. Configure the media player as defined in
3. You may need to manually configure the PC audio output as in
. Vista/Win7 users must configure the audio device for either
digital or analog output as described there.
4. Some TVs require you to select the Audio input source - verify that digital
audio source is selected using the TV remote control.
5. Restart the media player on any change in the configuration of the system.
Audio disappears after Link disconnection
Problem/Question:
Audio does not recover after link disconnects and reconnects.
Symptom:
I am watching a movie / you tube clip and suddenly there is a disconnect/
reconnect and after it the sound does not come back to the TV.
Solution:
This can happen (mostly in Vista) as in most video players after the movie has
started, they will not transfer the audio back to the USB audio device after the
reconnect.
Usually restarting the player or refreshing the web page should resolve this.
If this still does not help, try unplugging the PC dongle and then plug it again, wait
for the connection to re-establish and start the movie again.
You can also refer to the Audio setting section