Warpia SWP240 - Manual (Page 16)

16
Fit to TV
What is Fit to TV?
•
If using your Dock n’ Charge to connect to a TV, all of the Windows desktop may
not be available to view. Many TVs will automatically 'overscan' the image streamed
by cutting off the borders and filling the screen with the image.
•
On some TVs it may be possible to turn this 'overscan' off in your TVs settings
menu. Consult your TVs User Manual to see if this is an option for you. If you can do
so, then you will not need to use the Fit to TV function of the DisplayLink UI. This is
the best way to correct this issue.
•
Fit to TV can be used to reduce the size of the Windows desktop on the TV screen.
Notes:
•
Fit to TV only works in extend mode. If choosing the option while in mirror mode,
the DisplayLink screen will change to extend and be placed above the laptop screen in
Windows Display Properties.
•
Fit to TV does not support rotated modes.
Using ‘Fit to TV’
•
To configure Fit to TV, choose the option from the DisplayLink GUI. The following
interface appears
: