Warpia SWP240 - Manual (Page 24)

24
• The connection between the USB 3.0 cable and your Laptop or Tablet
• The connection between the USB 3.0 and the Dock n’ Charge
• The connection among the power supply, the Dock n’ Charge, and the
electrical outlet
• The connection between the video cable and the video output connectors
Note: For the connection of a VA, ensure that the DVI-I to VGA adapter also is
secured by the screws on both sides of it.
•
If the problem persists, disconnect all connections of the docking station, and
uninstall the docking station device driver.
Then, reinstall the docking station and the device driver.
2. You cannot play back videos on your external monitor(s) but can play them
back on your notebook computer monitor.
Some notebook computers do not support the Certified Output Protection Protocol
(COPP), and you will not be able to play back the protected videos on the external
monitors connected to the docking station . The Corel WinDVD 10 program also has
limitations on playing back videos in the Windows XP operating system.
To play back videos on the external monitor(s), you can connect the external
monitor(s) to the VGA connector(s) on your notebook computer, and extend the
display to the external monitor(s).
3. You cannot drag an application window to the other monitor(s) in the
Windows XP or Windows Vista operating system.
In the Windows XP or Windows Vista operating system, you cannot drag a
maximized window unless you reduce the window to a smaller size.
To drag a window from one monitor to the other(s), do the following:
a. On the window that you want to drag, click the Restore Down button or
double-click the title bar to make the window exit from its maximized status.
b. Drag the title bar of the window to the monitor where you would like the
window to be displayed.