Warpia SWP240 - Manual (Page 20)

20
6.2 Working with the Docking Station Utility
Checking for updates
The DisplayLink utility is able to check whether there is any update for the device driver
in the Windows 7, Windows8, and Windows 8.1 operating systems.
To check for device driver updates, do the following:
1. Click the DisplayLink icon in the Windows notification area. A pop-up menu opens.
2. Select Check for updates. The docking station utility will automatically search for
available device driver updates.
Notes:
• This feature is supported only in the Windows 7, Windows 8, and Windows 8.1
operating systems.
•
The DisplayLink icon is displayed only when an external monitor is connected
to the docking station .
•
Ensure that your notebook computer is connected to the Internet when you
are using this feature.
Manually enabling the headset and microphone jack’s
To manually enable the headset and microphone jack on the docking station,
depending on the operating system you are using, do one of the following:
For the Windows XP operating system:
1. Click the DisplayLink icon in the Windows notification area. A pop-up menu
opens.
2. Select Audio Setup. The Sound and Audio Devices Properties window opens.
3. Click the Audio tab.
4. Select a USB audio line-out device from the Sound playback panel, and then select
a USB audio line-in device from the Sound recording panel.
For the Windows Vista, Windows 7, Windows 8, or Windows 8.1 operating system:
1. Click the DisplayLink icon in the Windows notification area. A pop-up menu
opens.
2. Select Audio Setup. The Sound window is displayed.
3. Click the Playback tab to select a USB audio line-out device, and then click the
Recording tab to select a USB audio line-in device.
4. Click OK.