C. Crane CWF2WR - Manual (Page 10)

Connecting to the Internet
Rotate the dial and choose the name of your network or router,
then press the SELECT button.
5. If the network requires a
wireless password before
connecting, then you will see
this screen. To enter the
password, rotate the DIAL
until the first character of the
password is showing, then
press the 

button to begin selecting
the next character. When finished,
press the SELECT button to submit. To erase, press the 

button.
The remote control also offers a faster way to enter the wireless
password using the number buttons. Notice the letters printed
under each number button. For example: To enter “BigRig405”
you would begin by pressing the “2” button several times until the
upper case “B” is showing. Then press the  button. Next press
the “4” button several times until the lower case “i” is showing, and
so on…
For special characters like “$”, press the “1” button. When finished
press the “OK” button to submit.
Need Help? See page 32 for help finding your wireless password.
6. The radio will now attempt to connect to the network. This process
may take up to a minute to complete.
Note: When the radio is connected to the wireless network, a small
antenna icon will appear at the top-left of the screen. This icon will
be animated letting you know that you are now connected
wirelessly.
Page 10 CC WiFi 2