C. Crane CWF2WR - Manual (Page 31)

CC WiFi 2 Page 31
Resume When Power On:
The radio is designed to resume play of the last station when it is pow-
ered “on”. If there is a power outage in the middle of the night, and then
the power is restored, the radio will automatically start playing the last
station at previous volume level. As you can imagine, this could
disturb your sleep and may even be frightening. Change this setting to
“Off” to have the radio go to standby mode when power is restored after
an outage.
Software Update:
This setting allows the radios software to be updated if needed. Check
www.ccrane.com to see if there are any updates available. You will
need a USB flash drive and a computer with internet connection to
apply software updates. Software updates are not required.
Reset to Default:
Restore the radio back to factory settings. This will erase all information
on the radio including presets and network settings. In some cases, this
will correct problems or settings that are having a negative effect on
how the radio is operating.
Configuring your radio