C. Crane CWF2WR - Manual (Page 29)

CC WiFi 2 Page 29
Configuring your radio
- “Power Saving” will allow you to adjust the brightness of the
screen when the radio is turned off. If this mode is selected, the
screen will maintain this brightness all the time, whether the radio is
on or off.
- “Dimmer Timer” will only work while “Power Saving” mode is
selected. Choose how much time will pass before the screen
brightness changes from “Turn On” brightness to “Power Saving”
brightness. For example: If the dial or other button is pressed, then
the screen will use the “Turn On” brightness level and then return to
the power saving brightness level after 30 seconds of inactivity.
Power Management:
Choose how much time will expire before the radio will automatically
power down to save power. This setting will only take effect if there is
no volume or play is stopped.
Sleep Timer:
Listen to the radio as you fall asleep. After the set amount of time the
radio will turn itself off to give you better rest. Quickly set the sleep
timer using the “ZZZ” button on the remote control. Press “ZZZ” button
again to sleep longer. An icon will display at the top of the screen
showing time remaining until the radio turns off.
Buffer:
The buffer is the amount of time that the radio pre-records an internet
radio station before playing it. This buffer helps keep the station playing
smoothly, even if there are tiny gaps in the station stream. A shorter
buffer time will play the station quicker after it is selected because there
is not as much pre-recording time involved. A longer buffer may help for
stations with choppy streams.
Weather:
Choose a nearby large city and get weather updates and forecasts that
display on the standby screen while radio is off.