C. Crane CWF2WR - Manual (Page 9)

Connecting to the Internet
1. If you have a newer router with a
WPS button on the router then
choose “YES (WPS)”.
If your router does not have a WPS
button, then choose only “YES”.
2. If you chose “Yes (WPS)” then this
screen will appear. Press the button
on your router to complete the
wireless network setup. Please wait
as the radio finalizes the connection
to your router. This can take a minute
to complete. Continue on page 11.
3. If you chose “YES” then this screen
will appear. Rotate the dial and
choose “Wireless” to connect to the
router wirelessly.
Note: To connect to your router using
an ethernet cable, connect the
USB-to-LAN adapter (sold separately) to
the port labeled “Music In”
on the back of the radio. Next, connect an Ethernet cable (sold
separately) between the USB-to-LAN adapter and your router.
Lastly, choose “Wired” as per the screen above.
Continue on page 11.
4. After scanning for wifi networks, the
radio will display the names of
each network found within range.
CC WiFi 2 Page 9