Setting 12 hour/24 hour format tuning step, Setting tuning step, Headphone jack – C. Crane PR-D8 User Manual

Page 14

Advertising
background image

14

GB

Setting 12 hour/24 Hour Format Tuning Step

While the radio is switched off, press and hold band/step button for

approximately 5 seconds, display will show 12H, continue pressing

tuning up/down button for another 5 seconds, display will flash 12H.

By pressing tuning up/down button to select 24 hour format,

complete the setting by pressing band/step button.

Setting Tuning Step

Tuning steps in some countries are different from where you

purchase the radio. If you buy the radio in Europe and intend to use

in North America or South America, you may have to adjust the

tuning step so, the radio may continue to serve you well.

Upon resetting to the 12H/24H format the display will show FM and

flash 50 kHz (tuning step) followed by a beep. By pressing the

up/down tuning button, you may adjust it to100 kHz per tuning step

then press band/step button again to complete FM tuning step

reset. The display will show MW and flash 9 kHz after performing

the FM tuning step reset. By pressing tuning up/down button,

you may adjust to 10 kHz per tuning step. By simply pressing the

band/step button now the setting is completed.

Headphone Jack

A 3.5 mm headphone jack located on the left hand of your radio is

provided for use with either headphones or an earpiece.

When inserting a plug it automatically mutes the internal speaker.

Advertising