C. Crane PR-D8 - Manual (Page 27)

27
Menu Button
The menu button is to set up recording quality and also
system setup.
1. When the Power is on and on SD mode, press and release
the menu button, the display will show Record Setup and
System Setup. Press up or down button to select Record
Setup or System Setup. Press Play/Pause button to confirm
the selection.
a. Record Setup –
Press Play/Pause button again to enter Recording
quality selection, by pressing up or down button to select
recording quality to be 64kbps or 128 kbps or 192 kbps.
Confirm the selection by pressing Play and Pause button.
b. System Setup –
Press Play/Pause button to enter System Setup mode.
Press and release up or down button to select the set up of
LCD contrast, system information, format and reset.
A) LCD Contrast –
this is to adjust LCD backlight contrast. Press and release Play and
Pause button. By pressing fast forward or rewind button to
select the required LCD contrast.
B) System Information –
press and release Play and Pause button to see the total and free
SD card capacity.