C. Crane DAR-101 - Manual (Page 14)

13
Setting the date
1. Press the Menu button while the recorder is switched on.
2. Rotate the Tuning control until SYSTEM SETUP is highlighted,
and press the Enter button to enter the setting.
3. Rotate the Tuning control until TIME & DATE is highlighted, and press
the Enter button to enter the setting.
4. Rotate the Tuning control until DATE is highlighted, then press the
Enter button to enter the setting.
5. Rotate the Tuning control until DATE FORMAT is highlighted,
and press the Enter button to enter the setting. Rotate the Tuning
control to select your required date format, then press the Enter
button to confirm the setting. The display will revert to the
previous setting.
6. Rotate the Tuning control until DATE SET is highlighted and press the
Enter button to enter the setting. Rotate the Tuning control to select
the desired number for each setting, then press the Enter button to
confirm and proceed to the next setting.
2-6