C. Crane DAR-101 - Manual (Page 30)

29
Advanced setting
Contrast & backlight
1. Press the Menu button to enter the main menu.
2. Rotate the Tuning control until SYSTEM SETUP is highlighted,
and press the Enter button to enter the setting. Rotate the Tuning
control until DISPLAY is highlighted and press the Enter button.
3. Rotate the Tuning control until LCD CONTRAST is highlighted,
and press the Enter button to enter the setting. Rotate the Tuning
control to adjust the setting from 1 – 12.
4. Rotate the Tuning control until LCD BRIGHTNESS is highlighted,
and press the Enter button to enter the setting. Rotate the Tuning
control to adjust the setting from 1 – 9.
Power saving
You can set the recorder to automatically turn off after a preset time
has elapsed to save the power.
1. Press the Menu button to enter the main menu.
2. Rotate the Tuning control until SYSTEM SETUP is highlighted,
and press the Enter button to enter the setting. Then rotate the
Tuning control until POWER SAVING is highlighted, and press the
Enter button to enter the setting.
3. Rotate the Tuning control to adjust the power saving time from
1, 3, 5, 10, 30 and 60 minutes, and press the Enter button to
confirm the setting. Or select “Off” to disable the function.