C. Crane DAR-101 - Manual (Page 20)

19
Recording a telephone call
A telephone patch cord is included in your DAR-101 You will also
need a phone line splitter for recording telephone calls.
1. Connect the dual tip end of your patch cord to the two Phone In
sockets on the rear of the DAR-101. Connect the phone line
splitter to your phone wall jack.
2. Connect your existing phone line to the splitter. Connect the phone
plug end of the patch cord into the splitter.
3. Switch the mode switch to telephone mode, and ensure an
SD card with sufficient space is inserted correctly in the
SD card space.
4. Press the Menu button to enter the menu setting.
5. Rotate the Tuning control until RECORD SETUP is highlighted,
and press the Enter button to enter the setting.
6. Rotate the Tuning control until REC STANDBY is highlighted,
and press the Enter button to enter the setting. Rotate the Tuning
control to choose ON, and press the Enter button to confirm
the setting. Now your DAR-101 recorder is ready to record
incoming phone calls.