C. Crane DAR-101 - Manual (Page 26)

25
Timer play function
You can set up a specified time with the timer play function
of DAR-101, and your recorder will automatically play your audio
tracks when the time is up.
1. Press the Menu button to enter the main menu.
2. Rotate the Tuning control until TIMER PLAY is highlighted, and press
the Enter button to enter the setting. Rotate the Tuning control until
PLAY SOURCE is highlighted and press the Enter button.
Choose playing from SD card or USB device by rotating the Tuning
control and press the Enter button.
3. Rotate the Tuning control until MODE is highlighted, and press the
Enter button to enter the setting. Choose the setting from Once
and Daily by rotating the Tuning control and press the Enter button
Or choose OFF to disable the timer play.
4. Rotate the Tuning control until PLAY TIME is highlighted, and press
the Enter button to enter the setting. The hour digit of START TIME
will begin to flash. Rotate the Tuning control to choose the hour
as required, and press the Enter button to finish the setting.
Then the minute digit will begin flashing. Rotate the Tuning control
as before to set the minute as required, and press the Enter button
to finish the setting.