CANOGA PERKINS 9161 Network Interface Device - Manual (Page 24)

9161 Network Interface Device 3-10
Managing the 9161
You can manage the hardware and software for the 9161, including communication access.
Configure the 9161 for the System
The System Information screen provides various categories of optional information that system
administrators may track. To access the System Information screen, and follow these steps:
1. From the System menu type 1 , "System Information," and press <Enter>.
2. At the System Information screen, type the number for an item and press <Enter>, then type the
information and press <Enter>.
• 1. System Name – This is the name of the group this unit belongs to and can be up to a
maximum of 25 characters.
• 2. Contact – This enables you to add contact information,
such as names, and telephone
numbers up to a maximum of 25 characters.
• 3. Location – you can specify a location for this unit
up to a maximum of 25 characters.
• 4. Customer – you can use this field to specify your customer’s name and/or designator
up to
a maximum of 25 characters.
• 5/6. Information 1/2 – these two fields maybe used for additional information, such as
additional contact information, phone numbers, addresses, etc. up to a maximum of 40
characters.
• 7/8. Circuits Info 1/2 – these two fields are used of circuit identification purposes
up to a
maximum of 25 characters
• 9. Service Code – this field maybe used to identify the type of service this unit will be used
for up to a maximum of 10 characters
• 10/11. Date-in-Service/Date-Out-of-Service – These tow fields maybe used to keep track of
service dates up to a maximum of 10 characters and also has to be in a date format [mm/dd/yyyy]
• 12/13. Equipment Type/Code – These two fields is for your internal tracking of equipment
up to a maximum of 10 characters
• 14. Vendor – this field maybe used to identify your circuit vendor
up to a maximum of 25
characters
• 15. CLEI -
COMMON LANGUAGE® Equipment Identification, These are codes used primarily by
Service Providers to identify equipment for ordering and stocking. You may enter a maximum of 10
characters for this field.
• 16. Mfg Date – This field maybe populated with the units manufactured date
up to a maximum
of 10 characters and also has to be in a date format [mm/dd/yyyy]
3. To return to the System menu, press <Esc>.