CANOGA PERKINS 9161 Network Interface Device - Manual (Page 40)

Check the Static and Dynamic ARP Tables
The Static ARP table lets you set or change specific IP and MAC addresses for up to 10 ports. The
Dynamic ARP table lists currently-assigned IP and MAC addresses for various 9161 ports.
To view, set, or remove a static ARP address, follow these steps:
1. From the IP Settings screen, type 8 , "Static ARP Table," and press <Enter>.
2. At the prompt, type a number to edit a port, and then follow the prompts.
3. To return to the IP Settings screen, press <Esc>.
To view the current addresses on the dynamic ARP table, follow these steps:
1. From the Main menu, type 4 , "Reports," and press <Enter>.
2. From the IP Settings screen, type 6 , "Dynamic ARP Table," and press <Enter>.
3. To return to the Main Menu, press <Esc>.